Wilkerson 12 Series Modular Kits Bedienungsanleitung PDF herunterladen (Seite 2)

12 Series Modular Kits 83-960-000

Tighten the clamp screws alternating between the two screws

per connector until both screws are snug. Check the alignment

of each body to verify fit between body and clamp. The bottom

flange of the inner and outer clamp must be positioned below

the bottom edge of the body. Pressurize the assembly and

check for air leaks. If air leaks are found, depressurize the unit.

Loosen the outer clamp and check fit between the body and

clamps. Retighten the screws and check for air leaks.

Removal

Disconnect air supply and depressurize all air lines before

removing any modular units.

WARNING

Loosening the outer clamp screws may cause the

filter, regulator, lubricator, or accessory to dislodge

and fall. It is important to take necessary precautions

when loosening the outer clamp screws to prevent

the unit from falling and causing injury.

Loosen the outer clamp screws 8-9 turns. It is not necessary to

completely remove the screws. Slide the unit down until it

disconnects from the clamps. It may be necessary to pull the

outer clamp out when removing one of the units from the assembly.

GPA-96-301

thru

GPA-96-309 GPA-96-310

GPA-96-311

GPA-96-312

Wall Bracket

Inner Clamp

Outer Clamp

Clamp

Screw

Tube Seal (Assemble

Through Spacer)

racket Screw

orque To

.5 - 5.1Nm

(

40 - 45 In. Lbs.)

Start Screws Approximately 1 Turn By Han

Assemble To Bodies Or Port Blocks And

Torque To 3.4 - 4.5 Nm (30 - 40 In. Lbs.)

Figure 1

Figure 2

Service Kits Available

Description Kit Number

1/8" NPT Port Block GPA-96-301

1/4" NPT Port Block GPA-96-302

3/8" NPT Port Block GPA-96-303

1/8" BSPP Port Block GPA-96-304

1/4" BSPP Port Block GPA-96-305

3/8" BSPP Port Block GPA-96-306

1/8" BSPT Port Block GPA-96-307

1/4" BSPT Port Block GPA-96-308

3/8" BSPT Port Block GPA-96-309

Modular Connector Kit GPA-96-310

Wall Bracket Kit GPA-96-311

1/4" Lock Ball Kit GPA-96-312

1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare

Wilkerson 12 Series Modular Kits Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Wilkerson 12 Series Modular Kits